:	May 13, 2004

.

: Release the 2 lower clips first, use the access holes. Remove the grab handle cover.   Release the 4 clips.

.

Release the front door trim panel.   Release the 2 screw covers.   Remove the 8 screws.   Release the 12 clips.

.

Disconnect the door latch remote release cable.

.

Remove the front door trim panel.   Disconnect the 7 electrical connectors.

.

:   Do not disassemble further if the component is removed for access only. Remove the front door latch remote control handle.   Starting at the lower edge, carefully release the remote handle.

.

Remove the puddle lamp.   Carefully release the lamp.

.

Remove the tweeter.   Release the 3 clips.

.

Remove the mirror control switch.   Release the 2 clips.

.

Remove the speaker.   Remove the 3 Torx screws.

.

Remove the window control switch.   Carefully release the 4 clips.

.

Remove the 12 clips.

.

Install the window control switch.   Secure with the clips.

.

Install the speaker   Tighten the Torx screws.

.

Install the mirror control switch.   Secure with the clips.

.

Install the tweeter.   Secure with the clips.

.

Install the puddle lamp.

.

Install the front door latch remote control handle.

.

Install the clips.

.

Install the front door trim panel.   Connect the electrical connectors.   Connect the door latch remote control cable.   Secure with the clips.   Tighten the screws.   Install the screw cover.

.

Install the grab handle cover.